The 90-degree Herringbone Tiles and related Styles

The 90-degree Herringbone Tiles and related Styles

The 90-degree variant of the herringbone tiles attracts a lot of attention wherever it is seen. This variation looks precisely like a carefully assembled modified style of the 45-degree. So, instead of having a 45-degree tilt, the herringbone tiles are set at a right angle to each other. The 90-degree styling of these herringbone tiles is also concerning the centerline. 

In other words, if you are facing the wall or the floor, you can consider this pattern as though you are following the flow of herringbone tiles. That is, you place the first two tiles in place at a right-angle to the centerline. Then you continue the flow in the same direction to the alternating tiles. For instance, if you start from the bottom left corner of a wall, you start building the rest of the tiles up and sideways. 

Depending on your herringbone tiles’ width to length ratio, you can also discover that you have to focus on more than one row at a time. The easiest way to do this is to use herringbone tiles with a length that is four times the width. Therefore, you can simply place them by starting with a vertical tile at the lower-left corner of the workspace. You may like to get professional solution for all types of indoor/outdoor tiles and bathrooms designing/renovation on tileandbathco.com.au.

Next, place the second tile horizontally just to the right of this first tile. The next tile is placed vertically on the second tile until you cause the placement to journey to the far left. The next tile can also stand horizontally at the top of the second tile. As you repeat this procedure, you discover that the tiles form an L-shape in a weaved nest pattern. 

The Herringbone Pattern Variants

It is time to use the basic understanding of herringbone patterns and 90-degree variants. It is also important to bear that the herringbone pattern variations that you know form both 45-degree and 90-degree orientations. You can also arrange these tiles correctly to achieve the right style. Let us delve into the in-depth variants of the herringbone tiles world in home interior decorations.

  1. Herringbone 1:2 variant

The 1:2 ratio refers to the placement of these tiles and not the size of their dimensions. That said, the herringbone tiles in this design are all of the same length and breadth. And a 1:2 ration instead of a 1:1 ration showed a different style to the conventional one we know. The first three tiles in the arrangement are placed so that the first one takes its 45-degree angle to the center. 

Then you place the next two tiles perpendicular 45-degree to the first one. Howbeit, these last two are placed side by side with each other. This pattern eventually becomes identical to the previous one, only that you double up one of the positions of these fanciful tiles. Click here for other pros and cons of herringbone tiles.

  1. Herringbone 1:3 variant 

Next to the 1:2 ratio variant is the 1:3 variant which we can demonstrate in a similar way to the previous one. The difference between the 1:2 ratio laying and the 1:3 ratio variant is that the latter now has three parallel tiles at an angle of 45-degrees to the separately laid first one. So instead of putting 2 tiles on 1 as in the previous variant, we now place three on one.

However, for this variant pattern to work, the length of your herringbone tiles must be four times the width. The purpose of this length is to line the tiles up side-by-side along with the size of the first tile. Moreover, you can use a tile about 4 x 16 inches, 3 x 12 inches, and 5 x 15 inches. Any other size without this special requirement may not work for this purpose.

If you are lucky to have herringbone tiles with a length that is up to 6 times the width, that is also fair enough. After laying this template of four tiles, you can begin to build the rest of the tiles upwards or in the right direction. You can repeat the build-up to fill up the entire space. Also, starting from the Centerpoint, just embrace the flow to give a magnificent look at the end of the day. This progression shows that there is room to add more if anyone wants to explore more.

  1. Herringbone 2:3 variant

As you have seen the variation available for this arrangement now, you can exemplify the rest. For instance, herringbone patterns can now be shown by 1 by X or advance. The design can be 2 by X. therefore, another variation is the 2:3 variation, which is very similar to the 1:3 variation. This new one includes first laying 2 tiles in oriented one-way traffic and placing 3 parallel tiles on them. 

In addition, you can now begin to repeat the pattern upwards while working with wall tiles. If you are working on wall tiles, you can also start to set them from the Centrepoint. But creating a pattern from the floor to complete the target representation. Each of these varieties begins with only one tile, while the rest are multiple sizes on different occasions. We can also build it on the principle of more variations with the herringbone tiling pattern. 

Herringbone Variants with Matching Multiples

The expression “variants with matching multiples” refer to the system where the tiles have a regular angle with different orientations. For example, if you choose the 45-degree category, the options include a 1:3 herringbone pattern with one primary and 3 placed tiles. Also, the “matching principles” comprise the two numbers on each side of the colon. But there are more options such as the following:

  • 2:2 Herringbone Pattern

The 2:2 Herringbone pattern of these tiles represents a variant where all the numbers on each side match each other. In addition, they are greater than 1, where the varying positioning is at 45-degrees. 

  • 3:3 Herringbone Pattern

According to the requirements above, the 3:3 ratio format depends on the length of the tile to the width. So, it requires three tiles at an angle of 45-degree to the left and the second set of three tiles at the same angle to the right. 

Recreate your Living room, Bathroom, Kitchen, and Bedroom with Herringbone Tiles

Recreate your Living room, Bathroom, Kitchen, and Bedroom with Herringbone Tiles

If any of the above rooms in your house are too austere for your liking, you may want to explore the herringbone tiles. Herringbone tiles can stand alone in the typical pattern and be diversified into many similar types with stunning looks. Recreating your home interior will not be incomplete, except considering how herringbone tiles can help you. Although it was once not a typical tile laying pattern, it has become the most popular.

Recreate your Living room, Bathroom, Kitchen, and Bedroom with Herringbone Tiles

The name, herringbone tiles pattern, came from a special fishbone called the herring. Laying these tiles in an adjusted way is also achievable when you take the cross-braid laying pattern. Herringbone is stunning in suitably large rooms like your living room and bedroom. 

It combines the rustic traditional look with the modern contemporary feel. Moreover, adding different colors in the arrangement promotes a stone look, making the room more lovely. Arranging wood in the herringbone pattern also looks very natural and appealing, an ideal choice by professional interior decorators. 

Where to get the suitable Herringbone tiles in Sydney Australia

Seeking herringbone floor tiles in Australia is no small job for high quality. Of course, the old testing method gives you the right place to start; you can trust your instincts that cheaper and low-quality ones are also in the market. Therefore, we are committed to always bringing you some of the best herringbone tiles as a fair piece of your price-performance ratio. 

Herringbone tiles can play up your game with your existing pattern without comprising the element or metal backing. Herringbone tiles are fascinating in look and design, but there are also very pocket-friendly.

Some of the core reasons why you should buy herringbone tiles from us

  • Herringbone tiles do not absorb water and are also both stain and corrosion resistant
  • They are durable, versatile, water-resistant, and can serve for a long time to come
  • They come in a variety of colors, textures, styles, and patterns that fill the market
  • The best quality herringbone tiles are made from glass, ceramic, porcelain, stone Mosaic and marble materials. 
  • Herringbone tiles from our store come at a very affordable price, with the quickest delivery and a 24/7 online service to further meet your needs.
Recreate your Living room, Bathroom, Kitchen, and Bedroom with Herringbone Tiles

Best Ideas for Herringbone Floor tiles

The herringbone tiles used for the floor of homes and offices match both the traditional and the modern style. Perhaps, this reason is responsible for many people finding it easy to pick them up from any part of the home. You can use them in the dining room, living room, kitchen, bedroom, and bar. 

It also enhances your chances of creating a unique atmosphere with a magical feel and depth. It also looks like what can work for galleries, catering centers, restaurants, commercial areas. Are there special formats that one can combine to create a special offer with herringbone tiles? Below are some of the ideas that our experts compiled for working on herringbone tiles. 

  • Using the herringbone floor tiles on your floor, its color palette brings in a flexible adventure with different styles. So, you can pick colors from the palette: sky blue, gorgeous deep blue, or elegant black. But what is obtainable is often reconciled with many other interior elements.
  • Herringbone tiles are a perfect choice of creative designs. The tiles alone have not less than 6 variants of laying them, and each has its own peculiarity and application. The herringbone tiles simply show an exceptional pattern for a great look.
  • When you combine herringbone floor tiles with hexagon tiles, you get a unique floor design. And the way they can connect with hexagon tiles, they can also integrate with other shapes and styles of home flooring tiles.
  • Home interior designers can also create a spectacular effect by alternating the herringbone tiles with matt and glossy components. You can also explore the diversity of different colors when laying these tiles to get more unique options. 

How to Install Herringbone Floor Tiles in Australia

There are several procedures to take when laying herringbone tiles in different stages. We shall take this staged approach to describe what expectations are there and the best results obtained in what directions.

Preparations and preliminary considerations for laying herringbone tiles

  • Laying herringbone tiles is similar to the effect and challenges you face when applying the cross structure. So, this preparation for these patterns requires similar manual skills. There can be joint considerations that are very useful if one records success. 
  • The technology involved in the preparations can also allow for the creation og multiple grout joints within the system. Therefore, in executing projects that include using herringbone tiles, you should plan for sufficient time from the outset. In addition, there should also be enough joint material available for the project. And in the case of unique shapes during installation, try to use a tile cutter to trim in the individual elements that may not readily fit in. 
Recreate your Living room, Bathroom, Kitchen, and Bedroom with Herringbone Tiles

Place herringbone tiles in the correct manner

We have come to the crux of the matter: laying out the herringbone tiles in the manner that produces the desired results. Laying herringbone floor tiles have two common variants, which most designers employ. The first one has a 0-degree offset during installation. As a result, the herringbone braids appear parallel with the two opposite walls.

The other one is at a 45-degree installation. Each herringbone tile runs at a diagonal angle to the other throughout the room. When laying with the second variant, which is diagonal, you need to begin the laying process from a corner. Below are steps to follow

  • Ensure the surface is evenly laid and smooth. If not, adjust any wrong one or replace it if need be.
  • Choose the right starting point according to one of the two variants that we mentioned above
  • Draw an orientation line on the floor before you start laying your tiles at all
  • Create the next tile position on the first tile at a right angle
  • After laying the first two tiles correctly, continuing the arrangement becomes much more accessible by repeating the procedure.
  • Use a tile adhesive to tap in the individual tiles to not change position before you finish the laying. after applying the adhesive to keep them in place, you can use the rubber hammer to make them stick
  • Cut and insert the rise pieces with the perfect shapes to complete the end and have a straight line that aligns with the wall
  • Grout each tile according to the herringbone tile pattern layout and allow the whole system to dry. 
Tips On How To Lay Herringbone Wall Tiles

Tips On How To Lay Herringbone Wall Tiles

Recently, designers and homeowners have fallen in love with herringbone tiles. What makes this pattern so famous?  This eternal design is a popular choice for both wall and floor designs.

However, the laying of herringbone tiles on the wall has been a severe issue for beginners and professional tilers because of its uniqueness and application style. Let me be a bit more specific. The way of laying other herringbone tiles is quite different from the way other tiling patterns are applied. 

Herringbone tiles patterns are already laid on a mesh backing, ensuring that you can easily place and keep your design intact.  You may be wondering if you can lay out herringbone tiles pattern on your own. Yes, you can!  All you need to do is to pursue closely and get ready to follow the steps below:

Before I jump to the details on how to lay herringbone wall tiles, let us consider the needed tools and materials.

Tools

  • A tile cutter
  • Square
  • Water
  • A sponge
  • Safety glasses
  • Dust mask
  • Earmuffs
  • Markers
  • Angle grinder
  • Spirit level

Materials

  • Tiles 
  • Spacers
  • Tile mastic 

STEPS TO FOLLOW IN LAYING OUT HERRINGBONE WALL TILES

Step 1

Measure and mark the center point:  the first step in laying a herringbone tiles pattern on your walls is to search and find the wall’s center point. How can you do this? You can do this by measuring the length of the wall and mark the intermediate end.

Step 2

Dry lay the tiles: the next step is to dry lay the tiles. You need to apply your tiles on the ground before gluing them on the wall. You can achieve this by spreading a piece of heavy-duty cardboard onto the benchtop and use the spirit level to mark the middle point from the wall onto the cardboard. To make it simple to work out the herringbone tile pattern, you need to dry lay your tiles.

Step 3

Work out the 45 degrees angle for the first time: this is the step you use of your square. Proceed by setting your square to a 45-degree angle and then lay it to the wall at a close range to the halfway mark. Then, you place the first tile along the tiles to ensure that its corner is lined up with the halfway mark.

Step 4

Lay the following tiles: the next step is to lay the next tiles. But this one is quite different from the previous step. You have to have the next tile at a 90-degree angle to the first tile. Here, you need to place your spacers in between the tiles and then, you keep installing the tiles in this design until you need to cut your first tiles.

Step 5

Mark the tiles that need cutting: the next step is to mark the edge of the tiles where they need to be cut. Don’t forget to put the following tile and spacer in place. You can use a square or a ruler to draw lines in the tiles where they need cutting. Write on the tile to indicate what waste is. This is one of the crucial steps in laying herringbone tiles.

Step 6

Cut the tiles: now, you can make use of your tile cutter. Utilize the tile cutter to cut the tiles to the correct length. Then it would be best if you sandpapered the edges where they’ve been cut.

Step 7

Number the tiles: use your marker to number the tiles. Numbering is essential. Put the cut tiles in place on a wood-based material. Number them so that you’re going to lay them accordingly. This will help you to remember the order when you stick them on the wall.

Step 8

Mix the mastic: the next step in laying out herringbone tiles is to mix up the tile mastic in a bucket with water. Please note that you don’t make too much mastic to start.

Step 9

Apply the mastic on the wall: after mixing the mastic with water, you apply the mastic on the wall. Here, you make use of your trowel to scoop up some mastic. Don’t forget that you need to hold the trowel at a 45-degree angle and then apply it to the wall. The essence of having the trowel at an angle makes it spread the mastic more evenly. And don’t forget to clean up any extra gum from the benchtop.

Step 10

Glue the first tiles to the wall: the next step is to line up the corner of the first tile with the middle mark and stick the tile to the wall. Then you proceed by putting the second tile in place. You will use spacers’ in-between the tiles. Lay the third tile in place, with spacers between the other tiles. It would help if you gave those tiles a push and a slight wiggle to help the mastic stick. 

Step 11

Cutting tiles with an angle grinder: make use of your angle grinder if you need a small cut to a tile. Put on your safety tools and place the tile on a sawhorse. Make sure you hold it firmly and trim the tile. Also, you will use sandpaper to smoothen the edge of the tile.

Step 12

Cutting tile to fit along with the benchtop: make sure you measure from the corner of the tile to the benchtop and subtract 1.5mm off that for the grout line and spacers. Spot the distance on the tile. Set the square to 45 degrees and mark the line on the tile.

Step 13

Cut and glue the tile: use your tile cutter to cut the tile and then sandpaper the edge of the tile to make it smooth. Apply glue on the back of the tile and place it on the wall with spacers between it and the other tiles. You are getting the herringbone tiles pattern.

Step 14

Tiling around PowerPoint: measure the wall to one edge of the PowerPoint and the wall to the other edge of the PowerPoint. Then, measure from the benchtop to the bottom edge of the PowerPoint and then the top edge of the PowerPoint. Make sure you write down those measurements.

Step 15

Mark the tile: the next step is to mark the tile. You can achieve this by placing a full tile over the PowerPoint without glue on it. Put a mark on the four measurements onto the tile, take the tile off the wall, then use the square to mark where the tile needs cutting. 

Step 16

Cut the tile: make use of your tile cutter to cut the two edges of the tile.

Finally, laying out herringbone tiles’ patterns on your walls is easy if you follow the steps appropriately provided.

How To Install Herringbone Tile In A Bathroom

How To Install Herringbone Tile In A Bathroom

Installing a herringbone tiles pattern in a bathroom is good. The bathroom is one of the right places to establish a herringbone tiles pattern. Apart from the fact that the design is beautiful and eye-catching, there is another benefit to it if herringbone tiles pattern is laid in a bathroom. Remember, a bathroom is a room that contains a bath where one can bathe and do a kind of refresh. Hence,  a bathroom is a place where water flows consistently. Thus, installing herringbone tiles in the bathroom is quite impressive. You can know more about herringbone tiles for the bathroom by clicking here.

Before we proceed, I will like to set something straight. Herringbone tiles are the best pattern for your bathroom because of the firmness in installing them, and they can resist water. In addition to that, establishing this unique pattern in your bathroom will beautify it to the extent that you will feel refreshed and use your bathroom. 

Different herringbone tile designs are suitable for your bathroom. You can fix herringbone tile ideas like a herringbone feature wall, custom tile lettering, a herringbone shower full of variation, a glossy green design, and a lot more in your bathroom. Also, you can use any tiles created from ceramics, granite, and other natural stone to create a herringbone pattern for your bathroom.

However, this unique pattern is easy to install, and one can even install it by oneself, but you will have to follow the instructions closely. In that case, let me quickly highlight some tools and materials needed in installing herringbone tile in your bathroom. 

To install this unique pattern in your bathroom, you will need a tile cutter, tile spacers, trowel, mastic, a dust mask, ear buff, water, safety glasses, an angle grinder, a spirit level, and a sponge.

Are you ready for the ride? OK, let’s go!

Tips to follow in installing herringbone tiles in the bathroom

  1. Before you start tiling, you need to fix the surface to be tiled by applying a primer using a roller or sponge.
  2. Creating a shower hob. You can start a shower hob by measuring the walls and create a line using a straight edge. We will advise you to use Hebel blocks to build the shower hob.
  3. Waterproofing your bathroom. Take note of this vital step before you install a herringbone tile in a bathroom. You can use a neutral core silicone sealer to run a generous bead along with all internal corners. Then, apply ARDEX STB BUTynol tape along each corner of your shower to ensure no water gets behind the grate drain. Next, use a rotating cylindrical device to cover the entire wall and floor with a waterproofer. Please, ensure that the whole area is well waterproofed.
  4. Laying bathroom tiles. Don’t forget that you are trying to layout herringbone tiles pattern. This unique pattern requires a proper measurement before you start installing. Before you start laying, you need to search and find the center point of the wall and floor of the bathroom. You can do this by measuring the length of the wall and mark the intermediate end.
  5. The next step in installing herringbone tiles in your bathroom is to work out a 45-degree angle for your first tile. Thus, this is the time to use your set of a square. Set your square to a 45-degree angle and lie it on your bathroom wall at a close range to the center point. However, the next tile must be fixed at a 90-degree angle to the first one. Tile spacers will help you in achieving that.
  6. Cutting holes in tiles for taps and fittings. Virtually, installing a tile involves cutting tiles at some point. It is uncommon that walls and floors in a bathroom are just the suitable sizes that tiles fit perfectly without the tiles at some edge being cut to fit.  You will make use of your tile cutter to cut tiles to fit some edges. When installing a herringbone tiles pattern in a bathroom, you need to make some extra cuts.
  7. Grouting a bathroom. There will be a thin line in space between tiles. Therefore, grouting plays an essential role in laying herringbone tiles in a bathroom because tile is impervious to water. So, grouting them is a vital part of waterproofing and finishing the tile job. Although, the herringbone pattern is a pattern that doesn’t allow water to penetrate it. And that is if it is properly fixed.
  8. Don’t forget that you will need a marker to mark the edge of the tiles where they need to be cut. This is one of the essential steps in installing a herringbone tiles pattern in a bathroom. Then, after cutting, numbering the tiles will help in knowing the next tile to lay since all the rectangular pieces of tiles that will form the herringbone tile are already measured. Therefore, one needs to number them.
  9. Before you place a mastic at the back of a tile, ensure that the mastic is appropriately mixed with water. Also, kindly held your trowel at a 45-degree angle and then applied it to the wall.
  10.  Ensure that you measure from the corner of the tile to the benchtop and deduct 1.5mm off that grout line and spacers.
  11. Before installing the herringbone tiles pattern, ensure that you dry-lay the tiles. It would be best to lay your tiles on the ground before gluing them on the wall or floor in a bathroom.
  12. Put on your dust mask to protect you from inhaling harmful particles. Likewise, make sure you put on your ear muff to prevent your ears from noise derived from cutting the tiles.

CONCLUSION

Herringbone tiles pattern is a unique idea of laying tiles for your bathroom. This pattern offers unresolved confrontation to water, and it is durable. Its hard surface will rise to daily wear and tear with comfort in your bathroom. Herringbone tiles pattern pays to power in preservation for your bathroom. It displays stylishness, and you can create the look you want.

We provided 12 tips for you to consider in laying a herringbone tile pattern in your bathroom.

Pros And Cons Of Herringbone Tiles

Pros And Cons Of Herringbone Tiles

Herringbone tiles are rectangular tile pieces that meet at perfect straight edges to create a zig-zag pattern. Herringbones tiles pattern uses rectangular tiles instead of angled tiles. Therefore, this made the design look staggered or broken. It is usually laid at a 45degree angle to the floor or walls that it adjoins. When herringbone tiles are laid horizontally, they can create a unique and unusual design that will make the pattern accessible. 

Herringbone tiles have been the most acceptable pattern worldwide because of their uniqueness and simplicity in installation. It was specially named herringbone because it resembles the bones of a fish such as a herring. Herringbone tiles blocks can be parallelograms or rectangles. It can be used for road pavement, wall, and floor tiling.

The block edge length ratio of herringbone tiles is usually 2:1 and, at times, 3:1, respectively. A herringbone pattern is now in wallpaper, mosaics, clothing, and so on. There is no limit to where you can use herringbone tiles. It is used for both wall and floor tiling of bathrooms, kitchens, and bedrooms. Herringbone tiles’ pattern is durable, and they can resist water. One of the most effective tiling layouts is the herringbone tiles pattern.

Frequently, herringbone patterns can be confused with chevron tiling because they both have a similar angular layout. However,  chevron tiles feature diagonally cut edges that classically sit flush with one another to form a distinctive point, while herringbone feature four-sided tiles overlap.

ADVANTAGES OF HERRINGBONE PATTERN

  1. Herringbone tile backsplash doesn’t require any unique tiles. Herringbone tiles don’t need any additional cutting to be laid. Unlike other patterns, which may need tiles to be cut to a specific measurement. In other words, this unique pattern doesn’t call for any supplementary tiles to bring out its beauty in fullness.
  2. Herringbone tiles use a standard rectangular tile. And these rectangular tiles can be found easily at any hardware or home development store. Herringbone tiles backsplash is easy to get. 
  3. Herringbone tiles pattern is a tried-and-true method of tile-laying. This unique pattern is easy to lay down, and it is easy to personalize.
  4. It can make the most straightforward spaces look more eye-catching. Applying a white tile in a herringbone pattern can upraise the area that you’re renovating. A herringbone tile floor will go a long way in making your new modified house feel more like home. It all depends on the tile you want to use.
  5. Herringbone tiles are easy to install. If you have an idea and you know the materials and tools needed, you can install your tiles in this pattern. All you need to do is scour for how to lay tiles in a herringbone pattern and follow the guide.
  6. It is a pattern that is useful in the bathrooms. Herringbone tiles’ patterns can resist water. Water cannot penetrate easily into this unique pattern.
  7. Herringbone tiling layout can add subtle style to a room. It will create a black canvas for the rest of the space.
  8. Herringbone tiles will add visual detail to your floors or walls because of the unusual pattern. It suits any style.
  9. Herringbone tiles add width to the room. At times, the area you are tiling may be narrow. The herringbone tiling layout can make it seem more comprehensive than the original length. The reason is that the tiles are placed transversely, drawing the eye out to the uttermost part of the room. 

DISADVANTAGES OF HERRINGBONE PATTERN

The herringbone tiling pattern requires that you bring into line your tiles faultlessly before laying with no slip-up. A small error in the coordination and the procedure of tiles can damage the whole job as it will look insufficient after the entire floor or wall is set.

Hence, the most significant disadvantage of laying herringbone tiles comes up in the actual installation. The truth remains that the herringbone tiles pattern is easier to do on your own than another pattern, but it can still pose some level of difficulty. There is a fixed measurement to follow and consider, which must be accurate. No miscalculations.

Also, if one fails to align the tiles correctly before installing, the whole job will look unsatisfactory. With the herringbone tiles pattern, it is easy to start strong with accurate calculations and then veer off course along the way. So, it requires complete and total concentration. 

Any blunders in lining up the tiles will be recognized once the rest of the design has been positioned into place, and the result will look more disordered than sophisticated.

Herringbone tiles’ pattern also requires all the tools and materials to create its design. You can’t compare it to another way to only need four to five devices to do them effectively. Hence, putting all this into consideration makes this unique pattern to be more expensive than another pattern. 

Peradventure, you don’t want to take any chances. Therefore, to avoid any issue, make sure you take your time to check and double-check your work before you start. It would be best to employ a contractor or a trained tiler to help you out. 

CONCLUSION

Herringbone tiles have a great advantage. It is a unique pattern that has a glamorous look, and it is fashionable. It is simple to install, and it is the most durable pattern for tiling the wall and floor of your kitchen, bathroom, and other places in your home. Virtually all types of tiles can be used to form this unique pattern. You can use ceramics, granite, marble, and other natural stone tiles to create this unique design. Moreover, don’t forget that it is easy to install if the fo instructions are followed closely. 

However, we also highlighted some deficiencies in these herringbone pattern tiles. It doesn’t give room for any mistake either in measurement or calculation. Finally, we advised that if you don’t want to take any chance, you can employ a qualified contractor or a well-trained tiler to help you make your home feel new and modern.